|
Written by kdkinen
|
|
Friday, 08 July 2011 09:32 |
|
Remeasured Amps in/out at FULL BLAST with the load moved further away. Im still happy :D
& if is fooling the input higher, then i'd just look like an idiot, so 2 amps input for 20 amps output is still sweeeeet, if the meter is right.
It looked pretty solid even on the transformer, where the field would be highest id think :) |
|
Coil Winder Axial flux Alternator |
|
Written by Tecknomancer
|
|
Sunday, 19 June 2011 19:13 |
|
How to build a Axial flux alternator coil winder and how to use it, building tools to make construction easy , this is the new power system for the cartmotor |
|
Hyper-physics BITT 2.0 vs CONVENTIONAL EI TRANSFORMER |
|
Written by ThaneCHeins
|
|
Monday, 22 November 2010 16:01 |
BITT 2.0 employs a HIGH CURRENT SATURATED PRIMARY CORE to reduce the primary power factor down to (virtually) zero or a 90 degree phase angle differential between the primary voltage and current.
This means virtually 100% REACTIVE CURRENT and REACTIVE POWER in the primary coil.
|
|
Written by hhoforvolts
|
|
Sunday, 18 April 2010 23:31 |
|
|
Written by Tecknomancer
|
|
Wednesday, 16 September 2009 08:42 |
|
EV Gray tube first test. This is a unique set up utilizing a bedini motor with the magneto to
create the spark into a blocking diode. |
|
Steven Mark solid state generator P4 |
|
Saturday, 16 August 2008 10:18 |
|
Amazing video footage of Steven Mark's solid state free energy generator. This is video 1 out of 5. Really amazing technology a definite must see. |
|
3 Watt - Energy Radiant Oscillator Lite |
|
Friday, 15 August 2008 23:55 |
|
|
|
Written by Tecknomancer
|
|
Wednesday, 12 January 2011 10:57 |
|
Winding coils for use in a Pulse Motor how to build a coil that uses transformer plates as a core and requires a special winder to build this type of coil the pulse coil wires are all twisted together and the trigger is hooked up opposite of the power wires but they are all wound the same direction on the core . |
|
Written by ThaneCHeins
|
|
Sunday, 29 August 2010 16:53 |
Thane struck gold on this one, if this works the way he is explaining it ,it will change the world forever, just my 2 cents but from my experiments this will work the way he says, and under a dynamic load it will be more efficient.The Bi-Toroid transformer employs two secondary coils and a low reluctance toroid core which keeps the secondary induced flux from entering the primary this would normaly cause the primary coil to draw more source current in response to loading. with the back EMF pathway a world of posablitys are in sight.
|
|
Read more...
|
|
Evolution ofResonance Transformer |
|
Written by tortuga0303
|
|
Sunday, 18 April 2010 23:25 |
|
Decreasing voltage, and increasing amp draw causes an increased impedance with respect to the input increasing efficiency greatly. |
|
|
Steven Mark solid state generato p3 |
|
Saturday, 16 August 2008 10:16 |
|
|
|
|
|
|
|
|
|
Coil Chronicles
